Water blocking cable 500V

Application:

This cable is water resistant and suitable for installation as a cable outside the ship's brain

Features:

Good insulation performance when submerged in water

Minimize weight increase in water

The mechanical stability of the insulation material remains unchanged even when submerged

As a connecting cable for the motor rotor, a maximum of 1000 V with protection is fixed and installed in the pipeline

Conductor DIN VDE 0295 Class 5, fine copper wire, BS 6360 Class 5, IEC 60228 Class 5

Unit water blocking unit.

Separate water barriers.

Insulated special elastomer.

Fill with water blocking material.

Separate water barriers.

Fill with blocking water.

Divided water barrier

Shielded tinned copper braid

working voltage

Test voltage

450/750 V AC and three-phase current: 413/825 V DC: 0.6/1KV

2500V/15min

Dynamic bending radius 3 x medium (cable diameter<12mm) 4 x (cable diameter>12mm)

Fixed installation radius 3x (cable diameter<8mm) 4x (cable diameter: 8-12mm) 4x (electric diameter>12mm)

Mobile installation temperature -25 ° C to+80 ° C

Fixed installation temperature -40 ° C to+80 ° C

+40 ° C * (recommended) Underwater temperature limit+60 ° C (reduces cable life)

Static load

Total cross-sectional area x200 N/mm2

Minimum insulation resistance 20 MOhm x km