Single pair shielded& insulated longitudinal water blocking cable 500V

Application:

The cable installed outside the ship is horizontally water resistant and vertically completely water resistant (all core wires are not water resistant), designed according to VG 95218 part 29 standard

Features:

Good insulation performance when submerged in water

Minimize weight increase in water

The mechanical stability of the insulation material remains unchanged even when submerged

As the connecting cable of the motor, it is fixed and installed in the pipeline with protection up to 1000 V

Conductor: DIN VDE 0295 Class 5, fine copper wire, BS 6360 Class 5, IEC 60228 Class 5

Insulation: special elastomer

Cable forming unit: twisted pair

Individual shielding: Tinned copper braided single pair shielding

Twisted pair insulation: special elastomer

Individual shielding: Tinned copper braided single pair shielding

Filling: water blocking filling

Separation: water barrier

Sheath: cross-linked halogen-free flame retardant material.

Working voltage: 450/750V AC and three-phase current: 413/825 V DC: 0.6/1KV

Test voltage: 2500V/15min

Dynamic bending radius 3xD (cable diameter<12mm) 4 x D (cable diameter>12mm)

Fixed installation radius 3xD (cable diameter<8mm) 4xD (cable diameter: 8-12mm) 4xD (cable diameter>12mm)

Mobile installation temperature -25 ° C to+80 ° C

Fixed installation temperature -40 ° C to+80 ° C

Underwater temperature limit+40 ° C * (recommended)+60 ° C (reduces cable life)

Static load total cross-sectional area x200 N/mm2

Minimum insulation resistance 20 MOhm x km