Tauchflex FL flat, blue, Submersible pump cable

Product Application

Application:

Tauchflex-FL as a special cable

It can be used for the connection and control of Submersible pump, underwater lights, floating switches, etc. It has been verified that the submergence depth of 300 m in drinking water, production water and domestic water can be used in dry, wet and humid areas as well as outdoor environments.

Not suitable for installation in hazardous areas

CE=The product complies with EU Low Voltage Directive 2014/35/EU

Features:

Good insulation performance when submerged in water

Minimize weight increase in water

The mechanical stability of the insulation material remains unchanged even when submerged

As a connecting cable for the motor rotor, a maximum of 1000 V with protection is fixed and installed in the pipeline

Conductor: DIN VDE 0295 Class 5, fine copper wire, BS 6360 Class 5, IEC 60228 Class 5

Core insulation: EPR core insulation

Core wire color: 3-core and above, including yellow green ground wire

Cabling: The core adopts the optimal pitch and layered stranding

Tensile strength:/

Inner sheath:/

Outer sheath: PUR outer sheath

Outer sheath color: blue

Representative significance: G=with yellow green grounding wire x=without yellow green grounding wire

Working voltage: 450/750V AC and three-phase current: 413/825 V DC: 0.6/1KV

Test voltage: 2500V/15min

Dynamic bending radius: 3 x D (cable diameter<12mm) 4 x D (cable diameter>12mm)

Fixed installation radius 3xD (cable diameter<8mm) 4xD (cable diameter: 8-12mm) 4xD (cable diameter>12mm)

Mobile installation temperature: -25 ° C to+80 ° C

Fixed installation temperature: -40 ° C to+80 ° C

Underwater temperature limit+40 ° C * (recommended)+60 ° C (reduces cable life)

Static load: total cross-section X200 N/mm

Minimum insulation resistance: 20 MOhm x km